Smeg SF-640S Freezer User Manual


 
14
Removing right refrigerator door
1. Turn top hinge fastener counterclockwise and remove
the top hinge.(After the hinge is removed the door can
fall down forward. Be careful!)
2. Lift up the door and remove it.( The same as step4,
step5 in the removing the left refrigerator door)
Removing freezer door
Open freezer door as far as possible, pull up freezer
case and freezer drawer.
Push locks(on both sides) and pull forward Freezer
door and remove.
Replacing refrigerator doors
- Replace the left door, right door, then replace the top
hinge cover.
- Replacing steps are the reveres of the steps of removing
the doors.
Replacing freezer door
Align the end of rails(both sides) with supporter of
freezer drawer rail
Fully push and close freezer door , check locking of the
rail with the lock of supporter
Open the freezer as far as possible, assemble one
gear rail in supporter of rail gear.
Push and assemble another gear rail on opposite side
of the rail
Refrigerator Leveling &
Door Adjustment
(If needed. )
The refrigerator must be level in order to maintain optimal
performance and desirable front appearance.
(If the floor beneath the refrigerator is uneven, The freezer
and refrigerator doors look unbalanced.)
leveling and door adjustment
Leveling the appliance
Remove the front cover, if it is attached.
Use a hexagonal wrench to align the front of the
appliance.
Adjusting a refrigerator door
If the height of the refrigerator doors is uneven, turn the
screw nut on the lower hinge to adjust the refrigerator door.
- To raise a refrigerator door turn the screw counterclockwise.
- To lower a refrigerator door turn the screw clockwise.
1
2
1
2
3
4
1
2