Filter
Top Products
Instructions for the user
32
4.1.6 Electronic circuit board thermal protection
The appliance is equipped with a device which constantly measures the temperature of the
electronic circuit board.
If the temperature should exceed preset values, the device will trigger specific functions to reduce
the temperature and allow the ceramic hob to keep operating correctly.
The following table lists the automatically triggered procedures and the relative trigger temperature:
Operation Trigger
temperature
Fan switches on at low speed 50° C
Fan switches on at high speed 60° C
Fan switches back to low speed 55° C
Fan switches off 45° C
Operating power is reduced from Power function to 9 76° C
Operating power is reduced by one point for each cooking
zone
85° C
All cooking zones switch off 90° C
Cooking zones switch back on at reduced power 85° C
All cooking zones return to normal operation 80° C
The power displays on the hob flash to signal all operations of this kind
4.1.7 Ceramic hob thermal protection
Each cooking zone is equipped with a device which constantly measures its temperature.
If the temperature should exceed preset values, the device will trigger specific functions to reduce
the temperature and allow the ceramic hob to keep operating correctly.
The following table lists the automatically triggered procedures and the relative trigger temperature:
Operation Trigger
temperature
Operating power is reduced from Power function to 9 250° C
Operating power is reduced by one point 280° C
Cooking zone switches off 300° C
Power returns to set value 250° C
The power displays on the hob flash to signal all operations of this kind
Take care not to spill sugar or sweet mixtures on to the cooking hob
when hot. Never place materials or substances which may melt (plastic or
aluminium foil) on to the cooking hob. In the event, promptly switch off
and remove the molten material with the scraper provided while the top is
still warm to prevent it from being damaged. Failure to instantly clean
the glazed ceramic hob could lead to encrustations which are
impossible to remove once the hob has cooled down.
Important.
Beware of children in the vicinity as the signal lamps indicating residual heat are out of sight to them.
In fact, even after having been turned off, the cooking hob remains hot for a certain period of time.
Make sure that children never touch the cooking hob.