Filter
Top Products
Instructions for the user
EN
29
The oven should be operated at the maximum heat setting for 15/20 minutes
after use of specific products, to burn off the residues left inside the oven.
When the operation is complete, damp parts should be dried thoroughly.
10.6 Removing guide frames
Removing the guide frames makes it
easier to clean the side walls of the oven.
To remove the guide frames proceed as
follows:
• pull the front part of the frame toward
the inside of the oven in order to
unhook it from its housing 3;
• slide the frame out of the seats
located on the back 4;
• When cleaning is complete, repeat the
above procedures in reverse order to
put the guide frames back in.
10.7 Removal of self-cleaning side panels
Removing the self-cleaning panels makes
it easier to clean the side walls of the
oven.
• Remove the guide frames as
described in paragraph "10.6
Removing guide frames";
• Separate the self-cleaning panels
from the guide frames, removing the
ends of the frames from the slots on
the panels;
• When cleaning is complete, repeat the
above procedures in reverse order to
put the self-cleaning panels back in.
3
4
1
2