Smeg SNZ414IS Dishwasher User Manual


 
PROGRAMMING
In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the
PROGRAMS
lights
(6)
and
PHASES/PROGRAM
lights
(8)
will remain
off.
SELECTION PROGRAM
The program selection is possible
through the relative buttons
(2)
.
When the button relating to the program required is pressed, the relative
light will come on to confirm the operation.
14
Eco
65°C
P1 P2
P3
P4
P5
START PROGRAM
To start the dishwasher, press the
START/PAUSE
button
(4)
for a few
seconds, until the light of the first phase of the selected program starts to
flash (confirmation beep).
This phase, that updates itself during the cycle, is “indicative” since it is
influenced by the washing conditions such as dishwasher type and
quantity, entry temperature etc. For this reason it is normal to see the
updating during a program (increment and decrease of minutes)
specially in the passage from one phase to the other (for example, from
washing to rinse).
As the program runs, the
PHASES/PROGRAM
lights
(8)
will indicate
the current cycle status.
The light of the phase in progress will
flash, while the lights of the previous and
subsequent phases remain on.
N.B.
during execution of programs which
do not include a prewash, the first
PHASES/PROGRAM
light
(8)
will remain
off.
Pr
e
w
as
h
Wash
Rinse
Dr
y
User instructions