Smeg SNZ61MFA1 Range User Manual


 
Instructions for the user
9
8. FRONT CONTROL PANEL
All the cooker controls and commands are on the front panel.
ELECTRIC OVEN THERMOSTAT REAR LEFT BURNER
ELECTRIC OVEN FUNCTION KNOB REAR RIGHT BURNER
FRONT LEFT BURNER FRONT RIGHT BURNER
If the cooker is equipped with an electronic programmer, before using the oven make sure that the
symbol ; appears on the display. See paragraph “11. ELECTRONIC PROGRAMMER”.
HOB BURNER COMMAND KNOB
The flame is lit by pressing the knob and turning it anticlockwise to minimum
flame . To adjust the flame turn the knob between maximum ( ) and
minimum ( ). The burner goes out when the knob is returned to the position.
MAIN OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by turning the knob clockwise to
the required temperature, between 50° and 260°C.
If the appliance has an electric oven, the warning light will come on when the
oven is heating up. When it goes out it means that the required temperature has
been reached. Regular flashing means that oven temperature is being
constantly maintained at the programmed level.
MAIN OVEN CONTROL KNOB
Each of the functions listed below can be used (except the oven light and the
small grill) only together with the correct temperature thermostat regulation as
described on page of this manual.
UPPER AND LOWER HEATING ELEMENT GRILL ELEMENT + VENTILATION
LOWER HEATING ELEMENT LOWER HEATING ELEMENT +
VENTILATION
UPPER HEATING ELEMENT + GRILL
ELEMENT
VENTILATED HEATING ELEMENT +
VENTILATION
GRILL ELEMENT DEFROSTING