Smeg SP106VLIR Range User Manual


 
Instruction for the user
18
7.3 Use of the gas grill
7.3.1 Manual lighting of the gas grill burner
Having opened the oven door, press the knob and turn it clockwise to the grill
position, placing a lit
match to the burner on the roof of the oven.
Once the burner is lit, hold the knob down for about 10 seconds. If the burner does not stay lit after this
time, release the knob and wait for at least one minute before trying again. If the burner accidentally
goes out, turn the knob to the off position (
) and wait at least one minute before lighting again.
7.3.2 Electric lighting of the gas grill burner
Having opened the oven door, press the knob and turn it clockwise to the grill position.
Once the burner is lit, hold the knob down for about 10 seconds. If the burner has not come on by this
time, release the knob and wait for at least one minute before trying again. If the burner accidentally
goes out, turn the knob to the off position (
) and wait at least one minute before lighting again.
During a power cut the burner can always be lit with a match.
CAUTION: IT IS NOT POSSIBLE TO OPERATE THE GAS OVEN AND THE GAS GRILL
SIMULTANEOUSLY.
7.4 Use of the rotisserie
7.4.1 Using the rotisserie in cookers with maxi oven
Fit the supporting frame onto the second
runner up from the bottom so that the seat to
take the rod projects outside the oven. Place
the rod as shown in the diagram (1) and
push the frame into the oven until the end of
the rod reaches the hole in the rotisserie
motor. Now push the rotisserie rod to the left
until it reaches the position shown in the
diagram (2). To activate this function, turn
the switch to (
).
These operations must be carried out
with the oven switched off and cold.
When cooking is over, use the tool provided
to extract the rod from the hole (3) and
remove the frame (4) to bring the rotisserie
rod out of the oven cavity.
1
2
3
4
7.4.2 Using the rotisserie in cookers with standard ovens
Place the rotisserie frame “B” on the second
runners up from the bottom and insert the rod
A” in the hole in the back of the oven.