Filter
Top Products
User instructions
The washing cycle will not take place if the dishwasher door is left open or
not properly closed.
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program ECO
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting 5/6
CANCELLING THE CURRENT PROGRAM
• To cancel the currently selected program, open the door and hold
down the
PROGRAM SELECTION (3)
button for a few seconds
until the
indicator lights
for programs
4
and
5
illuminate
simultaneously (the word "end" is displayed on the window).
• Close the door.
• After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
1.2 Washing programs
Before starting a washing program make sure that:
• The water supply tap is
open.
• The
correct amount of detergent
has been added to the
dispenser
.
• The baskets have been
correctly loaded.
• The spray arms are able to
rotate freely
and without
obstruction.
• The dishwasher door is
securely closed
.