Filter
Top Products
EN
8
8
MAINTENANCE
Grease filters
CLEANING METAL CASSETTE GREASE FILTERS
• The filters must be cleaned every 2 months, or more frequently in case
of particularly heavy use of the hood. Filters can be washed in a dish-
washer.
• Pull out the sliding suction panel.
• Remove the filters one by one, after having disconnected the relative
fastening elements.
• Wash the filters, taking care not to bend them. Let them get dry before
refitting them. (The colour of the filter surface may change throughout
the time but this has no influence to the filter efficiency).
• When refitting the filters, make sure that the handle is visible on the
outside.
• Close the sliding suction panel.
Charcoal filter (Recycling version)
REPLACING CHARCOAL FILTERS
Warning: Turn the lights off and wait until the lamps cool down before
you change the odour filter.
• These filters are not washable and cannot be regenerated, and must be
replaced approximately every four months or more frequently by par-
ticularly heavy use.
• Pull out the sliding suction panel.
• Remove the grease filters.
• Remove the saturated carbon filter by releasing the fixing hooks
• Fit the new filter by hooking it into its seating.
• Replace the grease filters.
• Close the sliding suction panel.
Lighting
LIGHT REPLACEMENT
20 W halogen light.
• Remove the 2 screws fixing the Lighting support, and pull it out of
from the Hood.
• Extract the lamp from the Support.
• Replace with another of the same type, making sure that the two pins
are properly inserted in the lamp holder socket holes.
• Refit the Support, fixing it in place with the two screws removed as
above.