7
Moving the Wine Cooler
1) Remove all contents and make sure to tape down any loose items.
2) To avoid damaging the leveling screws, turn them all the way into the base.
3) Tape the door shut.
4) Make sure your unit stays in the upright position during transportation.
Defrosting the Wine Cooler
Your wine cooler is designed with an “Auto-Cycle” defrost system. The refrigerated surfaces of the unit will
defrost automatically, during the “off” cycle of the cold control. Water from the unit is disposed of
automatically, by means of being channeled onto a drip tray located on the compressor. Heat transfer from
the compressor causes this water to evaporate.
Please Note: DO NOT use boiling water to defrost because it may damage the plastic parts. In addition,
NEVER use a sharp or metallic instrument to remove frost as it may damage the cooling coils.
WINE COOLER DOOR
Door Reversal Instructions
Your wine cooler is built with a reversible door. You have the choice of either opening it from the left or right
sides. In order to reverse the opening direction of your door, please follow the below diagram.