Sony KDL-40V4150 Beverage Dispenser User Manual


 
28
Using P&P and PIP Features
This TV comes with the P&P and PIP features
which allow you to view two pictures
simultaneously. P&P (picture and picture)
provides two windows side by side. PIP (picture in
picture) provides PC input signal and TV
channels.
~
The CABLE/ANTENNA input must be connected to
use the P&P/PIP features.
P&P is not available with 1080/24p video format.
Closed Captions (CC) is available with P&P (see
page 38).
P&P
PIP
1 Press OPTIONS while watching one of the
following inputs: TV channels, Video,
Component, HDMI or PC.
2
Press
V
/
v
to highlight
P&P
or
PIP
and press .
~
To swap audio in P&P mode, use the B/b button to
swap the highlight between the Main Window and Sub
Window.
To swap audio in PIP mode, press OPTIONS, then
press V/v to highlight Audio Swap.
For compatible PC Timings, refer to the PC Input
Signal Reference Chart (see page 14).
Press B/b to highlight the window to change for
P&P. Press B/b to move the Sub Window for PIP.
• In the main window, press INPUT to select an
input to watch.
• In the sub window, change the channel by:
pressing CH+/–; entering the channel number
using the 0-9 numeric buttons; or pressing
JUMP to switch to the previously viewed
channel.
1 Press OPTIONS.
2 Press V/v to highlight Exit P&P or Exit PIP
(depends on the mode you are in), and press
to exit.
~
You may also press RETURN while in these features
to exit.
Additional compatible device with TV tuner is
required to watch two simultaneous live TV programs.
To Enter P&P and PIP
P&P Supported Inputs
In main window In sub window
Video 1/2/3
TV channel
(CABLE/
ANTENNA)
Component 1/2
HDMI IN 1/2/3/4
(except PC timing)
PIP Supported Inputs
In main window In sub window
PC TV channel
(CABLE/
ANTENNA)
HDMI IN 1/2/3/4 (PC timing)
Main Window
Sub Window
Main Window
(PC)
Sub Window
(Location of
the Sub
Window can
be moved by
pressing
V/v/B/b.)
To Change Inputs or Channels
To Exit from P&P and PIP