Filter
Top Products
HEAVY DUTY COUNTERLINE SPECIFICATIONS
OWNER’S MANUAL 1182845 REV 8PAGE 7
SPECIFICATIONS
CONSTRUCTION OF GRIDDLE MODELS
The front, sides, and 5" riser are all stainless steel. The rear and bottom panels are aluminized steel. The
reinforced double-wall sides are fully insulated.
The griddle surface is high-carbon, 1" thick, polished steel plated with trivalent chromium. The chrome plate
has an emissivity rating of approximately 0.08.
Each foot of griddle plate is heated by a U-shaped burner controlled by a thermostatic gas valve for
independent temperature control. Each pilot is equipped with a flame failure safety device.
The base of 60" and 72" griddles consist of two burner compartments spanned by one griddle surface with
one grease duct and one grease drawer.
Figure 3
Front View Side View
Top View
Width (see table below)
30.0"
1.5"
21.5"
5.3"
11.0"
2.8"
16.0"
15.1"
10.0"
2.0"
29.4"
31.5"
DIMENSIONS OF CHARBROILER MODELS
Model Width Number and Size of Burners Total BTU
HDC-24 & HDCL-24 24" 4 @ 20,000 80,000
HDC-36 & HDCL-36 36" 6 @ 20,000 120,000
HDC-48 & HDCL-48 48" 8 @ 20,000 160,000