Filter
Top Products
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International, Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Electrical Data
Typical Specifications
Model No. Dimensions Approximate Weight Shipping Carton
A B C
Width Depth Height Shipping Installed Length Width Height
210HX 36-3/8” 15-7/16” 14” 60 lbs. 38 lbs. 40” 26-1/2” 15”
(92.39cm) (39.2cm) (35.5cm) (28 kg) (18kg) (104.2cm) (67.3cm) (38.1cm)
214HX 36-3/8” 19-7/16” 14” 66 lbs. 43 lbs. 40” 26-1/2” 15”
(92.39cm) (49.4cm) (35.5cm) (31kg) (20 kg) (104.2cm) (67.3cm) (38.1cm)
Model No. *HZ Volts Amp Watts Heating Elements NEMA Cord
Above Below
210HX 60 120 14.2 1700 2 2 5-15P 4’
60 120 14.2 1700 2 2 5-20P** 4’
60 208 13.5 2800 2 2 6-20P 4’
60 240 11.7 2800 2 2 6-20P 4’
214HX 60 208 19.3 4000 3 2 6-30P 4’
60 240 16.7 4000 3 2 6-30P 4’
*50 220 18.2 4000 2 2 N/A N/A
*50 240 16.7 4000 2 2 N/A N/A
Ovens are constructed of stainless steel. Conveyor belt travels left to right but can be ordered right to left. Single and stacked
ovens furnished with 2-1/2” adjustable legs, quartz infrared heaters and on/off heat switch for heat control are standard. Product
opening adjustable from 1-1/2” to 3”, motors are permanently lubricated and bearings are long lasting teflon. Units are UL listed,
CSA certified and NSF approved. Printed in the U.S.A.
HOLMAN MINIVEYOR
®
CONVEYOR OVENS
Model 210HX and 214HX
Model No. Product Opening Cooking Chamber Production Capacities
Width Length
210HX Adjustable from 1-1/2” to 3” 10-5/16 16-7/8 120V - 30-6” Blanched shell pizzas per hour
208V - 45-6” Blanched shell pizzas per hour
240V - 31-9” Blanched shell pizzas per hour
214HX Adjustable from 1-1/2” to 3” 14-5/16 16-7/8 208V - 31-9” Blanched shell pizzas per hour
240V - 14-12” Blanched shell pizzas per hour
*CE certified units shipped with terminal block connection.
**Canadian Requirements
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
Performance Data
Specifications
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
A
B