Star Manufacturing 404D Fryer User Manual


  Open as PDF
of 2
 
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Overall Dimensions Cooking Surface Approximate Weight
(A) (B) (C)
Width Depth Height Height Installed Shipping
Model Inches Inches Inches Inches Ibs. Ibs.
No. (cm) (cm) (cm) (cm) (kg) (kg)
404D 12 24 24-5/8 17-5/8 64 73
(30.5) (61.0) (62.6) (44.8) (29.0) (33.1)
Fat Container Foam Compartment
Width Depth Height Width Depth Height
Model Inches Inches Inches Inches Inches Inches
No. (cm) (cm) (cm) (cm) (cm) (cm)
404D 10-3/4 13 10 10-3/4 20 1-1/4
(27.3) (33.0) (25.4) (27.3) (50.8) (3.2)
Pre-Heat to Fat Capacity Servings Per Load Pounds of french BTU's per hour to
Model 350
o
F(177
o
C) Ibs. 2 Oz. Servings fries per hour Maintain 350
o
F (177
o
C)
No. (kg)
404D 12 Minutes 18 8 20 4825
(8.2)
Model No. BTU Rating Type Connection
Natural Propane
404D 24,000/HR 24,000/HR 3/8” (1 cm) N.P.T.
Gas fryer is constructed with an all stainless steel cabinet with 4” high die-cast legs with a 1-3/8” adjustment. Fryer has an 18
lb. (8.16 kg) fat capacity welded steel kettle, tube type, with two welded heat tubes. Tubes have stainless steel radiants heated
by two in shot burners. Kettle has large foam area and large cold zone, and has a 1/4 turn front drain valve. Fryer has a gas
thermostat, manual reset type hi-limit thermostat and automatic safety pilot. Two large capacity nickel plated rear hanging bas-
kets are supplied as standard equipment. Gas connection is 1-1-2” (3.81 cm) N.P.T. male. Available in natural or propane gas.
Unit is AGA Certified, CGA and NSF listed. Printed in the U.S.A.
Typical Specifications
Performance Data
Dimensions & Weight
Gas Data
B
A
C
STAR-MAX GAS FRYER
Model 404D
13-5/8 [34.6CM]
®
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
 previous