Star Manufacturing 530TED Fryer User Manual


  Open as PDF
of 2
 
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Model Pounds of French Fries
No. Fat Capacity Per Hour
Pre-Heat Ibs. Ibs. Watts Per Hour
to 350
°
F (kg) (kg) to Maintain 350
°
F
530TD 4 1/2 Minutes 30 64 430
(13.6) (29.0)
530TED 6 1/2 Minutes 30 50 430
(13.6) (22.7)
Electric fryer has a stainless steel body with black polycarbonate trim on the front panel. A 200
o
- 375
o
(93
o
C - 191
o
C) adjustable thermostat and
a hi-limit safety thermostat, and a separate on-off switch are standard. Two nickel plated, lift out 15 lb. (6.8 kg) capacity steel kettles and 4”
heavy-duty legs are standard. Unit has two tubular type, two position, swing-up element with two side mounted nickel plated, perforated steel
mesh baskets. Unit carries approval of Underwriters' Laboratories, CUL National Sanitation Foundation. Printed in the U.S.A.
Overall Dimensions Cooking Surface Approximate Weight
Model Width (A) Depth (B) Height (C) Height Installed Shipping
No. Inches Inches Inches Inches Ibs. Ibs.
(cm) (cm) (cm) (cm) (kg) (kg)
530TD/530TED 24 24 16-3/4 10 69 81
(61.0) (61 ) (42.5) (25.4) (31.3) (36.7)
Fat Container Foam Compartment
Width Depth Height Width Depth Height
Model Inches Inches Inches Inches Inches Inches
No. (cm) (cm) (cm) (cm) (cm) (cm)
530TD/530TED 10-1/2 12-1/2 4-3/4 11-1/2 18 2-3/4
(26.7) (31.8) (12.1 ) (29.2) (45.7) (7)
Model Rated Wattage Nominal Amps
No. 208V 240V 208V 240V
530TD 8638 11500 41.5 47.9
530TED 6910 9200 33.2 38.3
Electrical Data
Performance Data
Dimensions & Weight
Typical Specifications
B
A
C
STAR-MAX TWIN POT ELECTRIC FRYERS
Models 530TD & 530TED
Legs Adjustable 4" to 5-3/8" (10.2 cm to 13.7 cm)
®
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
 previous