Star Manufacturing 624TD Griddle User Manual


  Open as PDF
of 2
 
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
S t ar M a nu f a c t u rin g I n te r n a t io n a l , In c .
Dimensions Weight
(A) (B) (C) Number of Plate
Model Width Depth Height Thermostats BTU Grid Area Thickness Installed Shipping
No. Inches Inches Inches Inches Ibs. Ibs.
(cm) (cm) (cm) (cm) (kg) (kg)
615TD 15 29 15-1/2 1 20,000 304 sq. in. 3/4 83 90
(38.1) (73.7) (39.4) 1961.4 sq cm (1.9) (37.7) (40.8)
624TD 24 29 15-1/2 2 40,000 498 sq. in. 3/4 165 175
(61.0) (73.7) (39.4) 3213.1 sq cm (1.9) (74.8) (79.4)
636TD 36 29 15-1/2 3 60,000 747 sq. in. 3/4 247 262
(91.4 ) (73.7) (39.4) 4819.6 sq cm (1.9) (112.0) (118.8)
648TD 48 29 15-1/2 4 80,000 996 sq. in. 3/4 330 350
(121.9) (73.7) (39.4) 6426.2 sq cm (1.9) (149.7) (159.0)
Gas griddles are constructed with stainless steel front panel with black polycarbonate trim and double wall aluminized steel side
panels. Griddle plate is 3/4" (1.9 cm) thick highly polished steel plate with 4-1/2” high tapered wrap-around stainless steel splash
guard. Unit has a 3-1/4" (8.3 cm) wide front grease trough with grease chute and a 4-1/2 qt. (4.26 L) stainless steel grease
drawer. Unit has a 20,000 BTU aluminized steel burner for every 12" (30.5 cm) of width and is controlled by a throttling type
thermostat. Thermostat knobs are protected by stainless steel bull nose front. A standing pilot is provided. Griddles are sup-
plied with 4" (10.2 cm) high die cast nickel plated steel legs that have a 1-3/8" (3.5 cm) adjustment. Gas connection is 3/4"
N.P.T. male and a convertible pressure regulator is provided. Units are approved for installation within 6" (15.2 cm) of com-
bustible and non-combustible surfaces and are AGA Certified and NSF Listed. Printed in the U.S.A.
Specifications
Typical Specifications
STAR-MAX
®
GAS GRIDDLES WITH
THERMOSTATIC CONTROLS
Models 615TD, 624TD, 636TD & 648TD
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
26-1/32
 previous