Filter
Top Products
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
S t ar M a n u f ac t u r in g I n t e r n a t i o n a l , I n c .
Dimensions
(A) (B) (C) (D) Plate Approximate Weight
Width Depth Height Leg Width Controls BTU Grid Area Thickness Installed Shipping
Model Inches Inches Inches Inches Inches Ibs. Ibs.
No. (cm) (cm) (cm) (cm) (cm) (kg) (kg)
615MD 15 29 15-1/2 11-3/4 1 20,000 304 sq. in. 3/4 83 90
(38.1) (73.7) (39.4) (29.8) 1961.4 sq cm (1.9) (37.6) (40.8)
624MD 24 29 15-1/2 20-3/4 2 40,000 498 sq. in. 3/4 165 175
(61.0) (73.7) (39.4) (52.7) 3213.4 sq cm (1.9) (74.8) (79.4)
636MD 36 29 15-1/2 32-3/4 3 60,000 747 sq. in. 3/4 247 262
(91.4) (73.7) (39.4) (83.2) 4819.6 sq cm (1.9) (112.0) (118.8)
648MD 48 29 15-1/2 44-3/4 4 80,000 996 sq. in. 3/4 330 350
(121.9) (73.7) (39.4) (113.7) 6426.2 sq cm (1.9) (144.7) (158.8)
Specifications
Typical Specifications
Gas griddles are constructed with a stainless steel front panel with black polycarbonate trim and double wall aluminized steel side panels.
Griddle plate is 3/4” (1.9 cm) thick steel plate with 4-1/2” (11.4 cm) high tapered wrap-around stainless steel splash guard. Unit has 3-1/4” (8.3
cm) wide front grease trough with grease chute and a 4-1/2 qt. (4.257 L) stainless steel grease drawer. Unit is equipped with a 20,000 BTU alu-
minized steel burner for every 12” (30.5 cm) of width and is controlled by a manual control valve. Valve knobs are protected by a stainless steel
bull nose front. A standing pilot is provided. Griddles are supplied with 4” (10.2 cm) high die cast nickel-plated legs have a 1-3/8” (3.5 cm)
adjustment. Gas connection is a 3/4” (1.3 cm) N.P.T. male with a convertible pressure regulator. Units are approved for installation within 6”
(15.2 cm) of combustible and non-combustible surfaces and are UL Gas Certified and UL Sanitation listed. Printed in the U.S.A.
STAR-MAX MANUAL GAS GRIDDLES
Models 615MD, 624MD, 636MD & 648MD
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.