Star Manufacturing 824T Griddle User Manual


  Open as PDF
of 2
 
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Dimensions
Model (A) (B) (C) (D) No. Plate Approximate Weight
No. Width Depth Height Leg Width Controls BTU Grid Area Thickness Installed Shipping
Inches Inches Inches Inches
824T 24" 32-3/8" 18" 21” 2 60,000 573 sq. in. 1" 220 lbs. 246 lbs.
(61 cm) (82.2 cm) (45.7 cm) (53.34) (3,697sq cm) (2.54 cm) (99.7 kg) (111.5 kg)
836T 36" 32-3/8" 18" 33” 3 90,000 860 sq. in. 1" 330 lbs. 369 lbs.
(91.4 cm) (82.2 cm) (45.7 cm) (83.8) (5,545 sq cm) (2.54 cm) (149.5 kg) (167.2 kg)
848T 48" 32-3/8" 18" 45” 4 120,000 1146 sq. in. 1" 440 lbs. 492 lbs.
(121.9cm) (82.2 cm) (45.7 cm) (114.3) (7,394 sq cm) (2.54 cm) (199.4 kg) (222.9 kg)
860T 60" 32-3/8" 18" 57” 5 150,000 1433 sq. in. 1" 550 lbs. 615 lbs.
(152.4 cm) (82.2 cm) (45.7 cm (144.78) (9,242 sq cm) (2.54 cm) (249.2 kg) (278.7 kg)
872T 72" 32-3/8" 18" 69” 6 180,000 1719 sq. in. 1" 660 lbs. 738 lbs.
(182.9 cm) (82.2 cm) (45.7 cm) (175.3) (11,091 sq cm) (2.54 cm) (299.0 kg) (334.4 kg)
Specifications
Typical Specifications
Gas griddles are constructed of stainless steel, valve knobs are protected by a stainless steel bull nose front. Griddle plate is 1”
(2.54 cm) thick highly polished steel plate with a 5” (12.7 cm) high tapered wrap-around stainless steel splash guard. Unit has a
3-1/2” (8.3 cm) wide front grease trough with with grease chute and a 6 qt. (5.68L) capacity stainless steel grease drawer.
Models 860T and 872T house two each 6 quart grease drawers. Units are equipped with a 30,000 BTU aluminized steel burner
for every 12” (30.5 cm) of width and are controlled by a throttling control valve with standing pilot light, 3/4” N.P.T. male gas con-
nection with convertible pressure regulator. Griddles are supplied with 4” (10.2 cm) high stainless steel legs that have a 1-5/8”
(4.5cm) adjustment. Units are approved for installation within 6” (15.2 cm) of combustible surfaces and are UL Gas Fired Listed
for U.S. and Canada and UL classified to NSF Standard 4 Sanitation. Printed in the U.S.A.
ULTRA-MAX THROTTLING THERMOSTAT
GAS GRIDDLES
Models 824T, 836T, 848T, 860T & 872T
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
®
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
 previous