Star Manufacturing FS1DT Electric Steamer User Manual


  Open as PDF
of 2
 
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
The top loading steamer’s body and cover are constructed of stainless steel. A cast aluminum steam generator with a clamp-on metal sheathed
tubular element is standard. The cover has an offset handle and is counter balanced with a spring assist for easy opening and closing. The 2-posi-
tion hinge stop brackets allow the cover to open to 60° or 90°. The steam zone in which food is held in either a half or two-thirds size special per-
forated steam pan accommodates 3.5” high food. Electronic controls have (4) independent programmable steam cycles. Direct connect models
have a fluid control valve, rear mounted female quick disconnect and water inlet tube assembly with male quick disconnect. Self contained mod-
els have a 96 oz. capacity water tank, tank drain, and supply pump. A lighted on-off switch, an easily actuated high cycle steam shot button, solid
feet, 6 foot power cord with NEMA rated plug (see specifications above) are standard on all models. Printed in the U.S.A.
Model Specifications
Typical Specifications
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
Dimensions
(A) (B) (C) (D) Approx.
Closed Open Weight
Model Width Depth Height Height Pan Size Voltage Wattage Amps NEMA# Installed
No. Inches Inches Inches Inches lbs. Direct Connect(D),
(cm) (cm) (cm) (cm) (kg) Water Reservoir(R)
FS1R-120V 18.8 17.2 10.5 22.75 1 / 2 120 1800 15 5-15P 48 R
FS1R-120VC* (47.8) (43.7) (26.7) (57.8) 1/2 120 1800 15 5-20P* (21.8)
FS1D-120V 18.8 17.2 10.5 22.75 1 / 2 120 1800 15 5-15P 48 D
FS1D-120VC* (47.8) (43.7) (26.7) (57.8) 1/2 120 1800 15 5-20P* (21.8)
FS1RT-120V 18.8 17.2 10.5 22.75 1 / 2 120 1800 15 5-15P 48 R
FS1RT-120VC* (47.8) (43.7) (26.7) (57.8) 1/2 120 1800 15 5-20P* (21.8)
FS1DT-120V 18.8 17.2 10.5 22.75 1 / 2 120 1800 15 5-15P 48 D
FS1DT-120VC* (47.8) (43.7) (26.7) (57.8) 1 / 2 120 1800 15 5-20P* (21.8)
FS2R-120V 22.4 17.2 10.5 22.75 2 / 3 120 1800 15 5-15P 58 R
FS2R-120VC* (56.9) (43.7) (26.7) (57.8) 2 / 3 120 1800 15 5-20P* (26.4)
FS2D-120V 22.4 17.2 10.5 22.75 2 / 3 120 1800 15 5-15P 58 D
FS2D-120VC* (56.9) (43.7) (26.7) (57.8) 2 / 3 120 1800 15 5-20P* (26.4)
FS2RT-120V 22.4 17.2 10.5 22.75 2 / 3 120 1800 15 5-15P 58 R
FS2RT-120VC* (56.9) (43.7) (26.7) (57.8) 2 / 3 120 1800 15 5-20P* (26.4)
FS2DT-120V 22.4 17.2 10.5 22.75 2 / 3 120 1800 15 5-15P 58 D
FS2DT-120VC* (56.9) (43.7) (26.7) (57.8) 2 / 3 120 1800 15 5-20P* (26.4)
B
C
A
FAST STEAMERS - TOP LOADING
Models FS1R, FS1D, FS1RT, FS1DT,
FS2R, FS2D, FS2RT & FS2DT
* Canadian Requirements
D
 previous