Filter
Top Products
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Dimensions Approximate
(A) (B) (C) Tray Weight
Model Width Depth Height Size Voltage Wattage Amps NEMA# Installed
No. Inches Inches Inches (inches) lbs. Direct Connect(D),
(cm) (cm) (cm) W x D x H (kg) Water Reservoir(R)
FSFR-208V 23 21.5 9.5
13.75” x 13.75” x 3”
208 3300 15.9 6-20P 48 R
(58.4) (54.4) (24.1) (21.8)
FSFR-240V 23 21.5 9.5
13.75” x 13.75” x 3”
240 3600 15 6-20P 48 R
(58.4) (54.4) (24.1) (21.8)
FSFD-208V 23 21.5 9.5
13.75” x 13.75” x 3”
208 3300 15.9 6-20P 48 D
(58.4) (54.4) (24.1) (21.8)
FSFD-240V 23 21.5 9.5
13.75” x 13.75” x 3”
240 3600 15 6-20P 48 D
(58.4) (54.4) (24.1) (21.8)
FSFRT-208V 23 21.5 9.5
13.75” x 13.75” x 3”
208 3300 15.9 6-20P 48 R
(58.4) (54.4) (24.1) (21.8)
FSFRT-240V 23 21.5 9.5
13.75” x 13.75” x 3”
240 3600 15 6-20P 48 R
(58.4) (54.4) (24.1) (21.8)
FSFDT-208V 23 21.5 9.5
13.75” x 13.75” x 3”
208 3300 15.9 6-20P 48 D
(58.4) (54.4) (24.1) (21.8)
FSFDT-240V 23 21.5 9.5
13.75” x 13.75” x 3”
240 3600 15 6-20P 48 D
(58.4) (54.4) (24.1) (21.8)
The front loading steamer is constructed with a stainless steel body. A cast aluminum steam generator with cast-in metal sheathed tubular element
is standard. Includes a stainless steel tray with a wire rack. Electronic controls have (4) independent programmable steam cycles. Direct connect
models have a fluid control valve, rear mounted quick disconnect and water inlet tube assembly. Self contained models have a 96 oz. capacity
water tank, tank drain, and supply pump. A lighted on-off switch, an easily actuated high cycle steam shot button, solid feet, 6 foot power cord with
NEMA rated plug (see specifications above) are standard on all models. Printed in the U.S.A.
Model Specifications
Typical Specifications
FAST STEAMERS - FRONT LOADING
Models FSFR, FSFD, FSFRT & FSFDT
B
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
C
A