Star Manufacturing SWB8SQE Waffle Iron User Manual


  Open as PDF
of 2
 
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Dimensions Approximate Weight
(A) (B) (C1closed
) (C2open)
Model Width Depth Height Height Voltage Wattage Amps NEMA Shipping Installed
No. Inches Inches Inches Inches lbs. lbs.
(cm) (cm) (cm) (cm) (kg) (kg)
SWB7R1E 10 15-3/4 9-1/2 22 120 900 7.5 5-15P 23 20
(25.4) (40) (24.1) (55.9) 208 676 3.3 6-15P (10.5) (9)
240 900 3.8 6-15P
230 825 3.6 CEE7-7
SWB7R2E 20 15-3/4 9-1/2 22 120 1,800 15 5-15P 41 37
(50.8) (40) (24.1) (55.9) 120 1,800 15 5-20P* (18.7) (17)
208 1,352 6.5 6-15P
240 1,800 7.5 6-15P
230 1,650 7.2 CEE7-7
SWB8SQE 10 18-1/4 12-1/2 27 120 1,645 13.7 5-15P 36 33
(25.4) (46.3) (31.7) (68.6) 120 1,645 13.7 5-20P* (16.5) (15)
208 1,235 5.9 6-15P
240 1,645 6.9 6-15P
230 1,510 6.6 CEE7-7
Waffle Bakers are built of polished stainless steel and heavy-duty cast aluminum grids, uniform top and bottom. The grids are
either 7" or 8" diameter depending on model. Waffle Baker has a full floating hinge made of heavy-duty stainless steel rising
evenly to allow for equal expansion of cooking waffle. The unit has metal sheathed tubular elements in both grids. A digital elec-
tronic timer and adjustable electronic temperature control, heavy-duty rocker switch with an indicator light and a stainless steel drip
tray are standard. The Standard Waffle Baker models have a NEMA 5-15 plug (120V), a NEMA 6-15 plug (208V/240V) and a 5-
20 plug (120V) for Canada. Units are listed by Underwriter's Laboratories. Printed U.S.A.
Model Specifications
Typical Specifications
WAFFLE BAKERS
Models SWB7R1E, SWB7R2E & SWB8SQE
B
A
C2
C1
A
B
C1
C2
A
B
C2
C1
*Canadian Requirement
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as
a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
 previous