Filter
Top Products
GP Series Portable Chillers Chapter 4: Operation 23 of 44
4-2 Initial Start-up
1. Verify the initial start-up checklist from Chapter 3, Section 3-11.
2. With the main supply power switch in the ON position, the screen will
display the version of the software for a period of 5 seconds, and then display
the main status screen.
Figure 4 - Main Status Screen
3. Set the Leaving Fluid temperature by depressing the
button to display
the menu.
Figure 5 - Menu Screen
4. Depress the
or button to highlight SETPOINTS and press . If
passwords were setup (See Section 3-12 for information on the controller
passwords) the password screen will appear.