Filter
Top Products
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 25
SHUT-DOWN
STOPPING THE MIXER
1. Push the
start/stop
switch (Figure 26) inward to stop
the engine.
2. Place the fuel valve (Figure 27) lever to the OFF
position.
3. Clean mixer as referenced in the maintenance section
of this manual.
Figure 26. Start/Stop Switch (Stop)
Figure 27. Fuel Valve Lever (Off)
CAUTION —Start/Stop Switch
NEVER disable or disconnect the start/stop switch. It
is provided for operator safety.
Serious Injury
may
result if it is disabled, disconnected or improperly
maintained.