DRAWER DIVIDER
Model 427R:
Each drawer of the Model 427R
has a divider that can be easily removed.
To remove, pull the drawer divider forward
and pivot the back edge of the divider away
from the back of the drawer. Reverse the
procedure to reinstall the divider. Refer to the
illustration below.
13
R
EFRIGERATED DRAWERS –
MODEL 427R
DRAWER REMOVAL
Model 427R:
Disconnect the control cable
before removing the top drawer. Refer to the
illustration below.
To remove a drawer from the Model 427R, pull
the drawer open until it stops. Lift up evenly
on both sides of the drawer front and pull out,
as shown in the illustration below.
IMPORTANT NOTE:
Be sure to unload the
contents before removing the drawer.
To replace a drawer, raise the front of the
drawer up and place onto the drawer slide
tracks. Be sure to engage the front holes of the
drawer slide with the small pegs at the end of
each rail.
Control cable
– Model 427R
Drawer removal – Model 427R Drawer divider – Model 427R
S
UB-ZERO WINE STORAGE USE & CARE
Before removing the top drawer of the
Model 427R, you MUST disconnect the
control cable.