Sub-Zero 700TR Refrigerator User Manual


 
6
|
Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Opening Dimensions
INTEGRATED MODELS
25"
(635)
OPENING
DEPTH
W
OPENING WIDTH
H
OPENING
HEIGHT
SIDE
VIEW
TOP VIEW
FRONT VIEW
OPENING DIMENSIONS
COLUMN W H
IC-27R, IC-27FI 27" (686) 81" (2057)
TALL W H
700TR, 700TFI, 700TCI 27" (686) 80" (2032)
736TR, 736TFI, 736TCI 36" (914) 80" (2032)
DRAWER W H
700BR, 700BF(I), 700BC(I) 27" (686) 34
1
/2" (876)
The depth of each integrated model is 24" (610). Allow for
panel thickness when planning the nished opening depth.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit will be required for this instal-
lation. If a dual installation kit is not specied, a minimum
2"
(51) ller strip is required between units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
IMPORTANT NOTE: Due to a more robust hinge on the 36"
unit, if a 27" tall unit is installed next to a 36" unit, the door
panels will align but interior face frames will not. This is only
apparent when both doors are open. Refer to the illustration
below.
ON/OFFALARMICE
WARMER
COLDER
WARMER
COLDER
REFRIGERATOR
736TCI
Face frame alignment.