Filter
Top Products
75
1
/2"
(1918)
7"
(178)
6"
(152)
E
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
1
/2"
(13)
18" (457)*
6"
(152)
24" (610)
OPENING
DEPTH
26
3
/16"
(665)
FLUSH INSET
DEPTH
SHUT-OFF
VALVE
OUTLINE
OF FLUSH INSET
APPLICATION WITH
3
/4" (19) PANEL
18"
(457)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
6"
(152)
FRONT VIEWSIDE VIEW
TOP VIEW
83
3
/4"
(2127)
OPENING
HEIGHT
84"
(2134)
FLUSH
INSET
HEIGHT
1
/4" (6)
2
3
/16"
(56)**
3" (76)
41
1
/2" (1054)
OPENING WIDTH
44" (1118)
FLUSH INSET WIDTH
1
1
/4"
(32)
1
1
/4"
(32)
2
3
/16"
(56)**
24" (610)
OPENING
DEPTH
26
3
/16" (665)
FLUSH INSET
DEPTH
*ANTI-TIP
BRACKET MUST NOT
INTERFERE
WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
**ASSUMES
3
/4" (19) PANEL
THICKNESS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
WATER LINE
1
/4"
(6)
1
1
/4"
(32)
FLUSH INSET
DETAIL
2
3
/16"
(56)
24" (610)
OPENING
DEPTH
75
1
/2"
(1918)
7"
(178)
6"
(152)
E
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
18"
(457)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
6"
(152)
FRONT VIEWSIDE VIEW
83
3
/4"
(2127)
OPENING
HEIGHT
41
1
/2" (1054)
OPENING WIDTH
3" (76)
24" (610)
OPENING
DEPTH
1
/2"
(13)
18" (457)*
6"
(152)
24" (610)
OPENING
DEPTH
SHUT-OFF
VALVE
OUTLINE OF
FRAMED, OVERLAY
OR STAINLESS
STEEL MODEL
TOP VIEW
*ANTI-TIP
BRACKET MUST NOT
INTERFERE
WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
WATER LINE
Installation Notes
Built-In models may be used in a standard
installation or in a flush inset installation which
allows the unit to be flush with surrounding
cabinetry.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
Specifications
Overall Dimensions 42"W x 84"H x 24"D
Door Clearance 26
5
/16"
Opening Width 41
1
/2"
Flush Inset Width 44"
Opening Height 83
3
/4"
Flush Inset Height 84"
Opening Depth 24"
Flush Inset Depth 26
3
/16"
Electrical Requirements 115 V AC, 60 Hz
15 amp circuit
Plumbing Requirements
1
/4" OD copper line
30–100 psi
Shipping Weight 541–582 lbs
Flush Inset Installation
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
**Dimensions based on
3
/
4
" (19)
panels.
Built-In Model BI-42S Installation Specifications
Standard Installation
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
Dimensions in parentheses are in
millimeters unless otherwise specified.
Unit dimensions may
vary by ±
1
/
8
" (3).
Overall Dimensions
42"
(1067)
84"
(2134)
24"
(610)
23
7
/8"
(606)
BEHIND
FRAME
42"
(1067)
26
5
/16"
(668)
42
1
/4"
(1073)