Sub-Zero ICBBI-36F Refrigerator User Manual


 
Wine Storage 62
16
mm
8 mm
13
mm
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
Illus. A Illus. B
13 mm
8
mm
3
mm
CABINETRY
GRILLE
SIDE VIEW
13 mm
2
mm
8
mm
8
mm
4
mm
GRILLE
DOOR
SIDE VIEW
Illus. C Illus. D
8
mm
2
mm
DOOR /
DRAWER
SIDE VIEW
Panel Offsets Illus.
MODEL ICBWS-30
Door /Grille Sides A
Grille Top B
Grille Bottom / Door Top C
Door Bottom D
Model ICBWS-30
FLUSH INSET PANEL
Illustrations A–D provide panel offsets and reveals for
model ICBWS-30 in a flush inset application. Refer to the
chart below for reference to the illustrations.
For additional information on panel reveals, visit the speci-
fication library section of our website, subzerotrade.com.
DUAL INSTALLATIONS
When two models ICBWS-30 or a model ICBWS-30 and
built-in unit are installed side by side, a dual installation kit
may be required. Contact your Sub-Zero dealer for the
proper components and installation instructions. For ques-
tions relative to the installation, contact your Sub-Zero
dealer. To obtain local dealer information, visit the find a
showroom section of our website, subzero.com.
DUAL STANDARD INSTALLATIONS
Two overlay or stainless steel units may be placed side by
side in a dual installation. Some dual standard installations
will require a dual installation kit, available through your
Sub-Zero dealer.
A custom filler strip can be used in between two units in
an overlay or stainless steel design application. It is rec-
ommended that the filler strip be at least 51 mm wide, to
prevent condensation between the units. Be sure to add
the filler strip width to your rough opening width.
Dual installations without a filler strip can only be accom-
plished using two units with opposite hinges as shown in
illustration A below. The dual installations shown in illus-
trations B and C require a filler strip.
IMPORTANT NOTE: For the application shown in illustra-
tion A, a dual installation accessory kit is required.
Illus. A
WITHOUT FILLER STRIP
FILLER STRIP REQUIRED
FILLER STRIP REQUIRED
Illus. B Illus. C