Sub-Zero ICBBI-48SD Refrigerator User Manual


 
Model ICBWS-30
OVERLAY PANEL
Overlay model ICBWS-30 can be used in an overlay or
flush inset application. The specific application will affect
panel sizes, opening dimensions and the installation.
Overlay model ICBWS-30 will be shipped without handle
hardware and with an overlay panel grille as standard
equipment. Along with the door panel, you will need to
provide a panel for the grille and hardware to complement
your surrounding cabinetry.
The overlay design allows the decorative panel to cover
the door trim for a more seamless appearance. The most
common way to achieve this look is to work with three
panels—the decorative overlay panel, which is typically
19 mm, a 3 mm spacer panel and a 6 mm backer panel.
Depending on your cabinet manufacturer, this could be
one panel routed for different dimensions. The illustrations
below will give you a better idea of the panel construction
and how it interacts with our frame. The size of the overlay
panel is critical, it must fit over the door frame.
IMPORTANT NOTE: Do not cover the glass door with a
solid panel. The window cut-out edges of the overlay,
spacer and backer panels will need to be finished, as they
will be exposed.
OVERLAY PANEL SPECIFICATIONS
Do not exceed overlay panel dimensions, as this could
cause damage to panels and the Sub-Zero unit.
Wine Storage 60
3 mm
OVERLAY PANEL
SPACER PANEL
BACKER PANEL
TRIM
8 mm min
DOOR FRAME
GLASS
Panel assembly cross section. Panel assembly rear view.
6
mm
3
mm
OVERLAY
PANEL
SPACER
PA NE L
BACKER
PA NE L
19
mm
typical
Grille panel dimensions listed are for a standard 2134 mm
overall height of the unit. For a 2108 mm overall height,
subtract 25 mm from grille panel height dimensions. For a
2235 mm overall height, add 102 mm to height dimensions.
Width dimensions do not vary.
ICBWS-30 Overlay
DOOR W H
Overlay Panel 762 mm 1772 mm
Spacer Panel 740 mm 1751 mm
Backer Panel 756 mm 1767 mm
GRILLE WH
Overlay Panel 762 mm 235 mm
Spacer Panel 740 mm 211 mm
Backer Panel 756 mm 227 mm
WINDOW W H
Cut-Out 597 mm 1607 mm
A
Location 83 mm
H
W
H
AA
A
A
Overlay Panel Requirements
MODEL ICBWS-30
Max Panel Weight 34 kg
Min Panel Thickness 16 mm