Filter
Top Products
10
WOLF COOKTOP VENTILATION HOOD USE & CARE
HALOGEN LIGHTING
The Wolf 30" (762) wall hood requires
two halogen bulbs (type T4, 12V, 20W).
The Wolf 36" (914) wall hood requires
t
hree halogen bulbs (type T4, 12V, 20W).
The Wolf 42" (1067) Island hood requires
four halogen bulbs (type T4, 12V, 20W).
Replacement halogen light bulbs for the Wolf
cooktop wall and island hoods are available
through your Wolf dealer. To obtain local
dealer information, visit the Locator section of
our website, wolfappliance.com.
HALOGEN BULB REPLACEMENT
1)
Turn ventilation hood blower and lights off.
2)
Remove filters from underside of the hood.
3)
Reach into the underside of the hood and
squeeze tabs on the back side of the bulb
housing.
4)
Grasp the front lens assembly and twist to
loosen.
5)
Remove the glass bulb cover and replace
the bulb. Use a paper towel when handling
the replacement bulb.
6)
Push the bulb securely into the socket and
snap the lens assembly closed.
IMPORTANT NOTE:
Use a paper towel when
handling the replacement halogen bulb to keep
oil on fingers from touching the bulb. Failure
to do this will cause the bulb to burn out at
first use.
Be sure that the bulb is cool before
r
eplacing. Halogen bulbs get hot
instantly and adjacent parts may retain
heat.
ACCESSORIES
Optional acces-
sories are available
through your
Wolf dealer. To
obtain local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.