Filter
Top Products
9
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
COOKTOP OPERATION
Before using for the first time, you should
clean your multi-function cooktop thoroughly
w
ith hot water and a mild detergent. Rinse and
dry with a soft cloth. This removes any
residual oil and grease left on the surface from
t
he manufacturing process. Apply a stainless
steel polish to protect the finish and add luster.
Refer to Care Recommendations on page 12.
To light the burner, push down and turn the
control knob counterclockwise to the HIGH
setting. You will hear a clicking sound and see
the burner ignite. Once the burner is lit,
continue turning the knob counterclockwise to
any one of the settings—HIGH through LOW.
FLAME HEIGHT AND APPEARANCE
Select a flame that is just high enough to
maintain the desired cooking speed and is
sized to fit the base diameter of the pan. Never
extend the flame beyond the base of the pan.
The flame on natural gas should be blue with a
deeper blue core. There should be minimal
trace of a yellow flame. A yellow flame indi-
cates an improper mixture of air and gas or
impurities in the gas supply to the cooktop. If
this occurs consistently, call a Wolf authorized
service center to adjust the mixture. With LP
gas, some yellow tipping to the flame is
acceptable and may not require an adjustment.
WOLF MULTI-FUNCTION COOKTOP USE & CARE
Control panel and knob
SURFACE BURNER
A spark electrode ignites the surface burner.
This control eliminates the need for a continu-
o
us open flame pilot. For added safety and
convenience, the burner is designed with an
electronic reignition system. This feature
e
nables the burner to automatically relight in
the event it is accidentally extinguished.
In case of a power outage, you can relight the
surface burner manually. Turn the control knob
to HIGH, then use a minimum 6" (152) igniter
to manually light the burner.
ILLUMINATED CONTROL PANEL
The control panel of your multi-function
cooktop is illuminated for an instant visual
indication that the burner is in use. It is a
safety signal reminding you that the flame is
on and active.
CONTROL KNOB
It is normal for the control knob to be slightly
raised above the surface. This space is an air
inlet necessary for good combustion of gas.
The knob rests on a valve stem with a rubber
grommet at the base. This design prevents
liquid spills from dripping into the controls
below the burner. Refer to the illustration
below
.
Air Inlet