Sub-Zero UC-15IO Ice Maker User Manual


 
I
C E M ACH IN E R E Q U I R E M E N T S
M
odels UC-15I and UC-15IO must have
open site (gravity) drain available
(see page 8).
A grounded, polarized electrical power
supply on a separate circuit servicing only
this appliance is required. If GFCI (ground
fault circuit interrupter) is required by your
local electrical code or in an outdoor instal-
lation, it must be breaker type, not outlet
type (see page 7).
Must have cold water supply line available
at ice machine (see page 8).
Clearance and air temperature requirements
must be met (see page 6).
If built into a cabinet, ice machine must be
removable for yearly cleaning procedure
(see page 23).
IMPORTANT NOTE:
Failure to follow these
installation guidelines may affect warranty
coverage.
The model and serial number are listed on the
rating plate in the upper left corner of the ice
bin and on the back of the unit. Refer to the
illustration below.
Dimensions in parentheses are in
millimeters unless otherwise specified.4
S U B - Z E R O I CE M ACH IN E I N S TA L L AT I O N
A
C C E S S O R I E S
Optional acces-
sories are available
through your
Sub-Zero dealer. To
obtain local dealer
information, visit
the Showroom
Locator section of
our website,
subzero.com.
M O D E L / S E R I A L N U M B E R L O C AT I O N
Models UC-15I, UC-15IP, UC-15IO & UC-15IPO
Proper installation requires connection to
the water supply, a drain and a dedicated
e
lectrical circuit. These connections are
the responsibilities of the owner/operator.
Improper connections can result in
personal injury, substantial property
damage and erratic machine operation. If
y
ou are unsure of your ability to safely
connect the ice machine, consult qualified
professionals or contact Sub-Zero.
Rating plate