Site Preparation 5
subzero.com/specs
Before You Start
M
ake sure the opening dimensions, door clearance,
electrical service and plumbing are correct for the model
you are about to install. Refer to specifications on the
following pages.
IMPORTANT NOTE: To operate properly, the door must
open a minimum of 90°. Use a minimum 3"
(76) filler in
corner installations to assure a 90° door opening. Allow
enough clearance in front of the unit for full door swing.
TOOLS AND MATERIALS REQUIRED
• Appliance dolly able to support 130 lbs (59 kg)
• Level—2' (.6 m) and 4' (1.2 m) recommended
• Phillips and slotted screwdriver sets
• Wrench set and allen wrench set
• Crescent wrenches
• Various sized pliers
•
5
/16" hex bolt nut driver
• Drill and assorted drill bits
• Model UC-24CI—4'
(1.2 m) of
1
/4" copper, braided
stainless steel or PEX tubing and saddle valve for
water line (do not use self-piercing valves).
• Model UC-24CI—Tubing cutter.
• Masonite, plywood,
1
/8" pressed fiberboard, cardboard
or other suitable material to protect finished flooring