Summit FS-62 Freezer User Manual


 
Before Putting Into Use
Before connecting the appliance to the power supply, leave it standing for about 2
hours, which will reduce a possibility of malfunctions in the cooling system due
to transport handling.
Clean the appliance thoroughly; especially the interior (See Cleaning and
Maintenance).
Instructions for Use
These instructions for use are intended for the user. They describe the appliance and
the correct and safe way to use it. The instructions were prepared for various
types/models of refrigerators therefore you may find the descriptions of some
accessories and functions that your appliance may not have.
We Care for the Environment
Our appliances are distributed in packaging made of environmental friendly
material which could safely be recycled, disposed of or destroyed without any
effects on the environment whatsoever.
Our instruction manuals are printed either on recycled paper or chlorine free
bleached paper.
Tips for Energy Savings
Try not to open the door too often, especially when the weather is hot and
humid. Once you open the door try to close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated, for
adequate air circulation behind the appliance.
Set thermostat from higher to lower settings (depending on how loaded the
appliance is, and what the ambient temperature is etc...).
The coils on the rear of the refrigerator should be cleaned periodically so
that it may be free of dust or any other impurities.
Ice and frost layer increase energy consumption, so clean the appliance as
soon as the layer is 1/8” thick.
Always consider instructions stated, in sections “Positioning and Energy
Saving Tips”, otherwise the energy consumption is substantially higher.
Do not place hot foods in the freezer.
A cool dry place allows your freezer to operate more efficiently, so keep
the freezer away from stoves and other heat sources.
Instructions for Use