Summit FS-62FR Freezer User Manual


 
Cleaning the Appliance
Disconnect the power supply before cleaning the appliance. Do not use coarse or
Aggressive cleaning agents as you can damage the surface.
Clean the exterior with water and detergent. Varnished surfaces are
cleaned with soft cloth and an alcohol based cleaning agent (for example
glass cleaners). You may also use alcohol (ethanol or isopropyl alcohol).
The application of abrasive and especially aggressive cleaners, such as
stainless steel cleaners, is not appropriate for the cleaning of plastic and
coated parts.
Remove the detachable accessories in the interior of the appliance and
clean it with water and liquid detergent. Plastic parts cannot be washed in
a washing machine.
Wash the interior of the appliance with lukewarm water, in which you add
one or two spoonfuls of vinegar.
Every now and then wipe the condenser on the rear wall. Use a soft non-
metal brush or vacuum cleaner.
After cleaning, connect the appliance to the power supply and reload the
packages.
Trouble-Shooting Guide
During the service of your appliance, you can come across some troubles that in
most cases result from improper handling of the appliance that can easily be
eliminated.
The Appliance Fails to Operate After Connecting to the Power Supply
Check the supply in the outlet socket and make sure the appliance is
switched on (thermostat in the operating position).
Continuous Operation of the Freezer System
The door was frequently opened or it was left open too long.
The door is not properly closed (the door may sag; the gasket may be
polluted or damaged).
Perhaps you have overloaded the appliance with fresh foods.
The reason may be inadequate ventilation of the compressor and
condenser (assures adequate air circulation and wipe off the condenser).
Instructions for Use