Sunbeam 2369 Mixer User Manual


 
9
CARING FOR YOUR MIXER
Ejecting the Beaters or Dough Hooks
After you’ve finished mixing, turn the
speed control dial to OFF and unplug
the electric cord from the electrical
outlet. Push the ejector button located
near the handle to remove beaters or
dough hooks.
Scrape excess batter off the beaters
using a rubber or plastic spatula. Do not
strike beaters on the rim of the bowl.
CLEANING YOUR MIXER
To clean the mixer, wipe the mixer head,
stand and turntable with a damp cloth,
then dry. DO NOT IMMERSE THE
MIXER HEAD OR STAND IN WATER.
Avoid the use of abrasive cleaners, as
they may mar the finish of the mixer.
Wash the beaters and bowls in hot,
soapy water after each use. Rinse
thoroughly and dry. Beaters and
bowls may also be washed in an
automatic dishwasher.
STORING YOUR MIXER
Store the mixer in a dry location,
such as on a counter top or table top,
or in a closet or cupboard.
Place the small mixing bowl inside
the large mixing bowl with the beaters
inserted into the proper sockets.
Place the dough hooks in the
small mixing bowl. Store the bowls
on the turntable. The beaters will help
hold the bowls in position. Wind the
electric cord into a coil, secure it
with a twist fastener.
MAINTENANCE
The motor of your stand mixer has
been carefully lubricated at the
factory and does not require any
additional lubricant.
Other than the recommended cleaning,
no further user maintenance should
be necessary.
Return the mixer to the nearest
Sunbeam Service Center for servicing
or repairs.