Filter
Top Products
3
SAVE THESE INSTRUCTIONS
No User Maintenance. Return to Service Station.
SAFETY FEATURES
• A short power supply cord is provided to reduce the hazards resulting from
entanglement or tripping over a longer cord.
• An extension cord may be used if care is exercised in its use.
• If an extension cord is used, the marked electrical rating of the extension cord should
be at least as great as the electrical rating of the appliance. The extension cord should
be arranged so that it does not drape over the counter or table-top where it can be
pulled on by children or tripped over accidentally. The electrical rating of the
Coffee Maker is listed on the bottom panel of the unit.
• This appliance has a three-prong alternating current plug. To reduce the risk of electric
shock, as a safety feature, this plug will fit in a grounded outlet only one way. If the
plug does not insert fully in the outlet. If it still fails to fit, contact a qualified electrician
to replace the obsolete outlet.
DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.
FEATURES OF
YOUR SUNBEA
M
®
COFFEE MAKER
• Pause & Serve
Allows you to interrupt the brewing cycle and pour a cup of coffee before the entire
carafe is finished brewing. To restart the brewing process, return carafe to warming plate
and coffee will automatically begin flowing through filter basket. Make sure carafe is
placed all the way on the warming plate.
CAUTION: DO NOT REMOVE CARAFE FOR LONGER THAN 30 SECONDS
OR THE FILTER BASKET MAY OVERFLOW.
• On Light
On Light lets you know when the Coffee Maker is on for safe operation.
• Snap-Out Basket
Filter basket snaps out for convenient filling and easy cleaning.
• Black Lined Cone Filter Basket
Cone-shaped filter basket enriches flavor and prevents bitter taste. Black lining
helps to hide stains. A standard #4 cone-shaped filter must be used.
• 1-Hour Automatic Shut-Off
For safety, the SUNBEAM
®
Coffee Maker has been designed with an auto shut-off feature.
The Coffee Maker shuts off automatically 1 hour after brewing cycle. To restart,
simply push the switch again.