Sunbeam SP Series Coffeemaker User Manual


 
1110
Suggested Coffee Measurement Chart
For best results, use level coffee scoop of fresh coffee beans.
When using pre-ground coffee, use level tablespoon (tbsp.) or level coffee scoops
of drip grind or a grind recommended for automatic drip coffeemakers.
TO BREW WHOLE COFFEE BEANS USE THIS AMOUNT OF GROUND COFFEE
4 cups 3 scoops 5 tablespoons or 2-1/2 scoops
2 cups 2 scoops 3 tablespoons or 1-1/2 scoops
Use more or less coffee to suit your taste 2 level tablespoons = 1 level coffee scoop
Brewing Your Coffee
(SP3 and SP4 only)
Once you have inserted your desired level
of coffee and water, push the ON button
to start the brew cycle. The ON Light will
go on, indicating that the Coffeemaker has
begun the brewing cycle. In a few minutes
the Coffeemaker will complete the brewing
cycle and switch over to the warming mode.
Turn your switch to the OFF position
when
the carafe is empty or when
the Coffeemaker
is not in use.
Brewing Your Coffee
(SPX3 and SPX4 only)
BREW COFFEE NOW
Insert desired level of water and coffee
(See Instructions on pages 9 and 10).
Press the BREW NOW button and the
LED light will illuminate indicating the
coffeemaker has begun the brewing
process. In a few minutes the coffeemaker
will complete the brewing cycle and
switch over to the warming mode.
BREW COFFEE LATER
To set the time that you would like to brew your coffee, press the
DELAY BREW button and a clock Icon will appear on the LED screen.
Press and hold down SET button while pressing the UP and DOWN
buttons (indicated by arrows), until you reach your desired brew time.
Release the SET button and your desired brew time will be programmed.
Press the BREW NOW button to then activate the delayed brewing
process. A Clock Icon will remain on the LED screen until the brewing
cycle has been completed.
BREWING COFFEE AFTER DELAY BREW IS ACTIVATED
After activating the Delay Brew mode,
should you desire to brew your coffee
at an earlier time, simply press the
BREW NOW button and your coffeemaker
will begin its brew cycle immediately.
This will effectively cancel out the
programmed brew setting.
CANCEL DELAY BREW SETTING
To cancel your programmed brew time without brewing coffee, simply
press the BREW NOW button twice. This action will momentarily turn
your coffeemaker on and then off again. The Clock Icon will disappear
from the LED screen and the programmed brew time will be cancelled.