Filter
Top Products
8
Operating your Café Series
™
Conical Burr Coffee Grinder
(continued)
8. To grind coffee, flip the switch to the ‘On’
position, see figure 4.
9. When the desired amount of coffee has
been ground, flip the switch to the ‘Off’
position. Remove the coffee container and
scoop out the ground coffee.
For grinding into the group handle
10. Position the group handle into the group
handle locator, see figure 5.
Note: There are two group handle locators
provided a smaller size to fit domestic
handles and a larger size for commercial
handles.
11. Flip the switch to the ‘Auto’ position, see
figure 6.
12. To grind coffee, press the group handle
against the button located in the centre
of the group handle locator, see figure 7.
13. When the basket is full, pull the group
handle off the button. Collapse the coffee
in the basket by tapping it on the bench
and repeat until the desired amount of
coffee has been ground.
Note:
Foreign objects like stones or twigs
can sometimes be found in whole bean
coffee and can cause the coffee grinder to
jam. Should this occur refer to the Care and
Cleaning section on page 11 as these objects
need to be removed immediately.
Figure 4
Figure 5
Figure 6
Figure 7