Sunbeam EK3800 Kitchen Utensil User Manual


  Open as PDF
of 12
 
4
Using your Sunbeam Knife
1. Interlock blades together before inserting
into the appliance. To assemble blades,
grasp shaft ends below the safety guards
and slip the rivet on the tip of the other
blade.SeeFigure1.Bringbladestogether
ensuring tips remain together.
Note:Alwaysusebothbladeswhenoperating
the Carveasy
™
and the Carveasy
™
Pro.
2. Hold assembled blades by the safety
guards and slide shafts gently into the
blade slot until clipped into position.
SeeFigure2.
Warning:Onlywhenbladesarefittedshould
the cord be connected to the
power outlet.
3.Inserttheplugintoa230-240volt(AC
only)poweroutletandensurethecordis
well away from the blades. Holding the
knife with one hand, slide and press the
double movement safety trigger positioned
under the handle to activate the motor.
Releasingtheswitchwillautomatically
stop the motor.
Warning:Avoidcontactwithmovingparts.
Keep hands, hair, clothing and other utensils
away from moving blades during operation to
preventpersonalinjuryand/ordamagetothe
knife.
4. When slicing is completed, turn the power
off at the power outlet and remove the
plug.SlidebacktheBladeRelease,hold
the blades by the safety guards with the
cutting edge facing downward and pull the
bladesoutoftheslots.SeeFigure3.
Warning: The blades of your Sunbeam
Carveasy
™
and Carveasy
™
Pro are sharp!
Handlewithextremecare.Werecommend
using the guard sleeve provided when
handlingtheblades.Donotfitorremove
blades whilst the knife is connected to
thepoweroutlet.Donotallowchildrento
operate the appliance.
Figure1
Figure2
Figure3
 previous next