Filter
Top Products
6
Using your Cafe Creamy
™
Automatic Milk Frother (continued)
Note: Flashing control panel lights indicate
the appliance is cooling down. Please wait
approximately 4 minutes before restarting the
appliance.
7. Follow cleaning instructions in the ‘Care
and Cleaning Instructions’ section of this
manual found on page 7, after use to
ensure long life.
Preparing Cold Milk Beverages
1. Remove the milk jug from the power base.
2. Open the lid of the milk jug and insert the
milk mixing attachment into the base of
the milk jug.
3. Pour ice-cold milk into the milk jug, to
a maximum of 250mL, the level that is
marked with ‘M’ for max. See Figure 3.
Note: If you fill the milk jug above the
maximum level, milk may be ejected during
operation.
Note: The milk jug must also be filled above
the minimum level, as indicated by ‘O’
symbol, to operate properly.
4. Add 1-2 tablespoons of chocolate powder,
instant coffee or an espresso shot.
5. Plug the power cord into a 230-240V AC
power outlet and switch the power on and
place the milk jug on the heating element
on the power base.
Note: The appliance does not have an on/
off power button. Functions are activated
through pressing feature buttons located on
the control.
6. Press the
mix cold milk button to
begin the cold milk blending function. In
approximately 3 minutes, the appliance
will automatically switch off and you will
be left with cold milk beverage in the milk
jug. Pour into a glass filled with ice to
keep cool.
Note: The blend cold milk button selected
will remain illuminated during operation,
and will turn off automatically when the milk
blending and heating is complete.
7. Follow cleaning instructions in the ‘Care
and Cleaning Instructions’ section of this
manual found on page 7, after use to
ensure long life.