Sunbeam EM0405 Coffee Grinder User Manual


 
1
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
MULTIGRINDER II™
• Always place the unit on a flat, level surface.
• Do not remove the cover before the blades have
completely stopped moving.
• Do not use the appliance continuously for more
than 60 seconds at a time.
• The grinder cannot operate without the lid in
position.
• Switch off and unplug at power point before
cleaning.
• Do not handle appliance with wet hands.
• Avoid contact with moving parts.
• Do not touch the MultiGrinder II™ blade while it
is operating, as it is very sharp. After the appliance
has been switched off the blade will continue to
rotate a moment longer.
• Do not use the MultiGrinder II™ with hot oil, as
there is a risk of burns due to splashing.
• Do not operate the MultiGrinder II™ without a
workload.
• Never insert metal or sharp objects into the inside
of the grinder bowl.
• Do not attempt to re-grind ground coffee.
• Check the grinding bowl for presence of foreign
object before using.
• Always operate the MultiGrinder II™ with the lid
correctly attached.
• Do not continue to operate the MultiGrinder II™ if
ingredients are caught in the grinding blades.
Sunbeam is very safety conscious when designing and
manufacturing consumer products, but it is essential
that the product user also exercise care when using an
electrical appliance. Listed below are precautions which
are essential for the safe use of an electrical appliance:
• Read carefully and save all the instructions provided
with an appliance.
• Always turn the power off at the power outlet before
you insert or remove a plug. Remove by grasping the
plug - do not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by a
qualified technician or service person.
• Always use your appliance from a power outlet of the
voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
no play with the appliance.
• The temperature of accessible surfaces may be high
when the appliance is operating.
• Never leave an appliance unattended while in use.
• Do not use an appliance for any purpose other than
its intended use.
• Do not place an appliance on or near a hot gas flame,
electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over
the edge of a table or bench top or touch any hot
surface.
• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair or
adjustment.
• For additional protection, Sunbeam recommend the
use of a residual current device (RCD) with a tripping
current not exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water or any other
liquid unless recommended.
• Appliances are not intended to be operated by means
of an external timer or separate remote control
system.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast type
environments.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.