Sunbeam EM0700 Coffee Grinder User Manual


  Open as PDF
of 19
 
14
Advanced Settings
Recalibration of the EM0700
To recalibrate for a coarser grind
6. Takenoteofyourcurrentgrindsetting
position.
7. Rotatethegrindadjustmentcollarto
position15onthegrindsettings,see
figure12.
8. Lifttherecalibrationreleaseleverand
removegrindadjustmentcollar,seefigure
13and14.
9.Tomakethegrindcoarser,repositionthe
collartosetting10onthegrindsettings.
10.Re-assemblethecollarbypressingdown
thefrontandthentherearensuringtwo
clicksareheard.
11.Returnthegrindsettingbacktoyour
originalgrindsettingposition.Yourgrind
willnowbecoarser.
12.Attachthehopper,openthehopper
closurearmandturnonthegrinder.
Note:Checkthenewsettingdeliversthe
requiredgrindbeforeuse.
To recalibrate for a finer grind
Note:Thegrinderisfactorysetforfine
grinding.Onlyre-calibratefinerifthe0
settingdoesnotachievethedesiredgrind
fineness.
6. Rotatethegrindadjustmentcollarto
position15onthegrindsettings,
seefigure12.
7. Lifttherecalibrationreleaseleverand
removegrindadjustmentcollar,seefigure
13and14
8. Tomakethegrindfiner,repositionthe
collartosetting17onthegrindsettings.
9.Re-assemblethecollarbypressingdown
thefrontandthentherearensuringtwo
clicksareheard.
10.Attachthehopperandrunthegrinderto
ensuresmoothoperation.
Caution:Re-calibratingtoofinemaycause
burrstocollideresultinginametallic
grindingnoise.Ifthisoccursturnoffthe
grinderandmovetoacoarsersetting(a
settingtowards30)orre-calibratefora
coarsergrind.
11.Openhopperclosurearmandadjust
grindsettingstodeliverrequiredgrind
size.
Note:Furthertuningmayberequired.
Note:Recalibrationwillchangeallprevioussettingsonthegrinder
1. Closehopperclosurearm.
2. Purgebeansthroughthegrinder.
3. Turntheoperationdialtothe‘off’position.
4. Disconnecttheplugfromthepowersocket.
5. Removethebeanhopperbyturninganticlockwise.
 previous next