Before using your Sunbeam Café
Series
™
Food Slicer 19cm
Assembling your food slicer
1. Place the food slicer on a flat level
surface.
2. Tilt the sliding food guide at approximately
45° angle ➀ and place the guide in the
grooves of the base ➁. Lower the carriage
onto the base. See Figure 1.
Note: You will know when the sliding food
guide is correctly positioned when the guide
slides freely along the tray.
3. Slide the safety food holder onto the arm
of the sliding food guide.
Important: It is essential that you use the
safety food holder as a safety measure.
Figure 1
6
➀
➁