Filter
Top Products
3
How to use your Sunbeam
Citrus Juicer
Before use
Before using your Sunbeam citrus juicer for
the first time, apart from the motor base,
wash all parts in warm soapy water. Rinse
and dry thoroughly.
1. Place the citrus juicer jug onto the motor
base.
2. Select the cone size desired, depending on
the size of fruit you are going to juice.
3. Cut citrus fruit in half, cutting across
segments.
4. Plug the power cord of the citrus juicer
into a 230-240V power outlet and turn
power on.
5. Press fruit down onto the cone and the
juicing action will start automatically.
6. Lift the fruit off the cone and juicing
action will stop automatically.
Small Juicing Cone
Variable Pulp Control
Reversible Motor
Juicing Tips
• Fruit juiced at room temperature will yield
more juice.
• Roll fruit between palm of your hand and
the bench top before cutting, to loosen
fibres.
• Push fruit from side to side against cone
while juicing to extract all the juice.
Care and Cleaning
Unplug and remove all parts from the motor
base before cleaning.
Motor Base
Wipe with a damp cloth. Never immerse
in water or other liquids. Never use harsh
abrasives or detergents.
Jug, Pulp Basket, Cover and Juicing Cones
Wash in warm to hot water using a mild
detergent.
Note: Do not wash any parts of the citrus
juicer in a dishwasher. The hot water
temperature and harsh detergents may
ultimately warp or scratch these parts.
Storage
Sunbeam suggests your citrus juicer be kept
on a dry bench top in your kitchen, where it
will always be ready for use. The cover will
keep your citrus juicer free from dust.