Sunbeam JE6400DG Juicer User Manual


 
12
Care and cleaning
Note: Ensure that the juicer is unplugged
from the power outlet prior to cleaning.
Dishwashing
All parts of the Sunbeam Fresh Start™ juicer,
excluding the motor base, can be placed in
the dishwasher for effortless cleaning after
juicing.
Note:
If using the dishwasher, due to high
temperatures we recommend placing parts
only on the top rack of your dishwasher. This
will prevent any damage to the product due
to heat.
Quick clean
For easy cleaning, ensure that immediately
after use that the juicer is disassembled and
that each removable part is rinsed under
running water, removing any wet pulp and
then allow to air dry.
Thorough cleaning
Disassemble the juicer and place all
removable parts aside, see ‘Disassembling
your Fresh Start™ juicer on page 11.
Rinse the juice collector, juicer cover, pulp
container and food pusher under running
water and wash with warm, soapy water.
Rinse well.
Using the nylon cleaning brush supplied
with the juicer, hold the stainless steel blade
and filtering basket under running water and
brush the outside of the basket first. Then
with the basket still under running water,
brush the inside of the basket in an anti-
clockwise direction, removing the pulp. To
ensure the stainless steel blade and filtering
basket is free of all remaining pulp, hold it
up to light and ensure that the holes in the
filtering basket are not blocked.
Important: Juicing blades are very sharp,
handle juicing filter basket with care when
removing, replacing and cleaning.
Use a soft, damp cloth to wipe the motor
base clean.
To clean the motor base
Clean the motor base of the juicer using a
damp soft sponge with mild detergent and
wipe over the appliance.
Important: Never immerse the motor base in
water or any other liquid.