Filter
Top Products
7
Assembling your Sunbeam
Fresh Start
™
Juicer
Before Use
After unpacking your Sunbeam Fresh Start™
Juicer, we recommend that you dissemble
the unit before using for the first time. Wash
all parts except the motor base in hot soapy
water. Rinse and dry immediately.
Important: Always ensure your juicer is
unplugged from the power outlet when not
in use, during assembling or whilst removing
parts.
1. Set the motor base on a dry, level surface.
For convenience when juicing, have the
control switch facing you – figure 1.
2. Place the juice collector / bowl onto the
top of the motor base – figure 2.
3. Position the stainless steel blade and
filtering basket onto the motor drive shaft
and push down until firmly in
place, the arrows indicate the correct
alignment position of the basket – figure 3.
4. Place the juicer cover onto the juice
collector / bowl, with the feed chute
positioned over the stainless steel blade
and filtering basket and push into position
– figure 4.
Figure 3
Figure 4
Figure 1
Figure 2