Filter
Top Products
12
Care and cleaning
Note: Ensure that the juicer is unplugged from the
power outlet prior to cleaning.
Quick clean
For easy cleaning, ensure that immediately after use
that the juicer is disassembled and that each removable
part is rinsed under running water, removing any wet
pulp and then allow to air dry.
Thorough cleaning
Disassemble the juicer and place all removable parts
aside, see ‘Disassembling your Café Series™ juice
Extractor’ on page 11.
Rinse the juice collector/bowl, juicer cover, pulp
container and food pusher under running water and
wash with warm, soapy water. Rinse well.
Using the nylon cleaning brush supplied with the juicer,
hold the stainless steel blade and filtering basket under
running water and brush the outside of the basket first.
Then with the basket still under running water, brush
the inside of the basket in an anti-clockwise direction,
removing the pulp. To ensure the stainless steel blade
and filtering basket is free of all remaining pulp, hold
it up to light and ensure that the holes in the filtering
basket are not blocked.
Important: Juicing blades are very sharp, handle juicing
filter basket with care when removing, replacing and
cleaning.
Important: Never immerse the motor base in water or
any other liquid.
Important: Do not use chemical, steel wool or abrasive
cleaners to clean the outside of the juicer, as these will
scratch the stainless steel and die-cast metal surface.
To clean the motor base
Using a damp soft sponge with a mild detergent, wipe
the motor base clean.