Filter
Top Products
6
Always disconnect the kettle from the power
outlet before cleaning.
Never immerse the kettle switch area, cord
or power base in water, or allow moisture to
come into contact with these parts.
Removal of mineral deposits.
Mineral deposits in tap water may cause
the interior of the water gauge to discolour.
To remove this build-up, use Sunbeam Liquid
Descaler, a simple to use, non-toxic cleaner
available from Sunbeam Appointed Service
Agents.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
2. Empty the solution from the kettle. Fill the
kettle with clean water, bring to boil and
then discard the water. Repeat and the
kettle will then be ready to use.
To clean the polished exterior
The stainless steel surface may be wiped over
with a damp cloth and polished with a soft
dry cloth.
CAUTION: Do not use chemical, steel wool,
or abrasive cleaners to clean the outside of
the kettle, as these will scratch the stainless
steel surface.
To clean the mesh filter
Remove the lid from the kettle. Grasp the
top of the scale filter and pull upwards to
remove. Wash in warm soapy water and dry
thoroughly before replacing in the kettle.
Care and Cleaning of your
Polished Dome Kettle