Filter
Top Products
7
Always disconnect the kettle from the power
outlet before cleaning.
Never immerse any part of the kettle in
water, or allow moisture to come into contact
with the kettle switch area, cord or power
base.
Removal of mineral deposits.
Mineral deposits in tap water may cause the
interior of the water gauge to discolour. To
remove this build-up, use Sunbeam Liquid
Descaler, a simple to use, non-toxic cleaner
available from Sunbeam Appointed
Service Agents.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
2. Empty the solution from the kettle. Any
stains remaining inside the spout can be
removed by rubbing with a damp cloth. Fill
the kettle with clean water, bring to boil
and then discard the water. Repeat and the
kettle will then be ready to use.
To clean the kettle exterior
The kettle surface may be wiped over with
a damp cloth and polished with a soft dry
cloth.
CAUTION: Do not use chemicals, steel wool, or
abrasive cleaners to clean the outside of the
kettle, as these will scratch the surface.
To clean the mesh filter
Press the button on the handle to open
the hinged lid. Grasp the top of the mesh
filter and pull upwards to remove. Wash in
warm soapy water and dry thoroughly before
replacing in the kettle.
Care and cleaning