Filter
Top Products
Before using your Mixmaster Compact
Before assembling your Sunbeam
Mixmaster Compact, be sure the power
cord is unplugged from the power outlet
and the speed control switch is in the ‘0’
OFF position.
1. Press the ‘tilt’ button, located on top of
the neck of the Mixmaster Compact.
While the button is depressed, hold the
handle and ease the head of the
Mixmaster back, see figure 1. The
Mixmaster head will lock into this tilt
position, see figure 2.
2. Select the desired attachments,
depending on the mixing task to be
performed: beaters for whisking, mixing
and beating, or dough hooks for kneading.
Inserting the beaters
3a. Beaters can be inserted in either socket,
as the beaters are identical.
Inserting the dough hooks
3b.To insert the dough hooks, place the
dough hook with the small washer into
the left socket. Place the other dough
hook into the right socket.
Note: Ensure both beaters or dough hooks
are fully inserted into the correct sockets
or your mixing results may be affected.
4. Place the 3 litre mixing bowl onto the
turntable and lock into place, see figure 3.
5. To lower the head of the Mixmaster and
beaters/dough hooks into the bowl,
depress the ‘tilt’ button, hold the handle
with the other hand and ease the head of
the Mixmaster down. A ‘click’ will indicate
when the head has reached the correct
position, see figure 4 over page.
6
Using your Sunbeam Mixmaster
Compact