1) Touch CLOCK pad.
2) Use the number pads to enter the correct time. You
must touch at least three numbers to set the clock
(one for hour and two for minutes).
3) Touch CLOCK pad again.
NOTES: This is a 12 hour clock. When the oven is
first plugged in or when power resumes after a power
interruption, the display will show ENTER CLOCK
TIME. If you prefer to not have the clock displayed,
touch RESET.
You can check the clock time while cooking is in
progress by touching the CLOCK pad.
OPERATING INSTRUCTIONS
SETTING
THE CLOCK
# Pad % of Power
1
2
3
4
5
6
7
8
9
10
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
6
SETTING
THE TIMER
1) Touch TIMER.
2) Enter the amount of time by touching the number
pads. Digit time is in minutes and seconds and set left
to right. Set one digit (a 5 for 5 seconds) or up to four
digits (2405 for 24 minutes, 5 seconds).
3) Touch START/STOP.
NOTES: Time countdown can be seen in display for
3 seconds before clock or cooking time is returned to
display.
Touch TIMER and then touch RESET to cancel
TIMER during timing process.
COOKING
PROGRAMS
A) ONE-STAGE COOKING
1) Use the number pads to set a cooking time. You
can set a cooking time from one second to 99
minutes and 99 seconds.
2) If you want to set a power level other than 100%
power, touch POWER LEVEL, then use the number
pads to enter the power level. You can set the power
level from 1 to 9.
3) Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
B) TWO-STAGE COOKING
Some recipes require different stages of
cooking at different temperatures.
1) SET STAGE 1:
Follow steps 1 and 2 in “One-stage
Cooking”. DO NOT TOUCH START
2) SET STAGE 2:
Touch COOK then enter proper cooking
time and (lower) power level. (Most 2-
stage recipes use lower power for second
stage.)
3) Touch START/STOP.
NOTES:
• After stage 1 time has elapsed, one
signal sounds, signaling the beginning of
stage 2.
• After total time has elapsed, 4 signals
sound and END appears in display. Touch
RESET or open oven door to clear END
before starting another cooking function.
CHILD LOCK
• To set, press and hold RESET for 3 seconds. LOCK is indicated on the display.
• To cancel, press and hold RESET for 3 seconds. LOCK indication disappears.
The safety lock prevents unsupervised operation by children.